51 Responses to “2007 Mirraco Price List”

1. Richard Spotts Says:
   August 21st, 2006 at 1:11 pm

   Where can I purchase a Mirraco bike? Is there any dealers in Delaware?

2. Mikal Gehrmann Says:
   August 21st, 2006 at 2:13 pm

   When and where can I buy a Mirraco bike? Is there any dealers in Norway???

3. Eick Ebie Says:
   August 21st, 2006 at 2:58 pm

   Are your bikes gonna be in eddys bike shop in north eastern Stow Ohio? Also what day are they gonna be out?

4. scott Says:
   August 21st, 2006 at 6:52 pm

   I think you guys have priced the bikes high. There are too many other bikes on the market for less when BMX sales have taken a down swing. Poor business choice… However, 850.00 for the LTD\’s would make more sense and be more in line with the current market.

   Mirraco replies:

   A few words about pricing. We’re publishing prices on the site because we get so many requests to know what each bike costs. By law, in the US we can’t tell dealers what price to sell our bikes for, so if you call a local dealer the price they give you might be a little higher or a little lower than what we have listed on the site.

   The goal at Mirraco is not to have the lowest priced bikes. We’re concerned about value not price; in other words what you get for the price we charge. Our plan is to build them right and charge a fair price. We’d rather be on the expensive side and sell a product we don’t have make excuses for than sell a ton of cheap bikes at Wal-Mart prices.

   The prices shown on this site are subject to change without notice. That’s because parts makers may raise their prices, we may have to change a part or supplier unexpectedly, fuel costs fluctuate, and because the US dollar’s value compared to other currencies changes daily. It sounds complicated, but we’re just trying to be up-front and keep you informed.

   One last note - Prices in other countries will almost always be higher than what you see here because of expensive ocean freight, customs fees, and other costs distributors have to deal with when bikes are imported into different countries.

   JF

5. josh Says:
   August 21st, 2006 at 6:59 pm

   why was the price upped by 99$ for the ltds?

6. Sean Hanni Says:
   August 21st, 2006 at 8:33 pm

   when are these avalible because im trying to convince my parents to get me a Blend 1 s for my birthday on september12th

7. Keith King Says:
   August 21st, 2006 at 8:38 pm

   Mirra you gotta do a flatland bike …….

8. Paul Vaccarello Says:
   August 21st, 2006 at 9:47 pm

   I was wondering about the bike Blend LTD if you guys could switch it to right-sided drive and add a front brake to it also and how much would that cost to do so.

9. McCart Says:
   August 21st, 2006 at 11:03 pm

   i know your only doing 250 of the ltd series but in case i dont have the money for my bike when they are released are you gonna sell the mirra blend ltd frame as a seperate component? that way i cant just peice together the complete ltd as i go. i need that frame its only 4pnds and 12 ounces thats insain for a freestyle bike! thanks so much for pushing the bar with the bike companies we appreciate it alot! i stopped running pegs to save weight but know i can put them back on thanks

10. Danny Says:
    August 22nd, 2006 at 2:52 am

    Will your bikes be coming to Australia? And if so please may you tell me the name of your Australian distributor. Thanks very much for your time.

11. Ho Says:
    August 22nd, 2006 at 10:14 am

    TREK DEALERS WILL HAVE MIRRACO BIKES! What are the prices of just frames and fork combos?

12. Ricardo Mendoza Says:
    August 22nd, 2006 at 11:34 am

    Hey Congratulations for your company. Your bikes rules!!!

    I’m from Aguascalientes México and I’m a big Mirra fan, so I want to know when MIRRAco comming to México or how and where I’ll can purchase a Mirra Blend LTD bike. Is this possible in a place close of my country?

13. Jim Says:
    August 22nd, 2006 at 10:06 pm

    Are you going to sell frame only or just doing complete bikes

14. Josh Says:
    August 22nd, 2006 at 10:50 pm

    To actually add to my last comment, these frames have thicker dropouts than the Macneils, and you mentioned running pegs, so if you ride more hard street or park, 5mm dropouts are a little bit safer….just so you know. Either way 4lbs is hella light

15. Chelsea B. Says:
    August 23rd, 2006 at 9:35 am

    oh gosh, the black pearl LTD looks sweet! too bad i dont have any money….and my mum just ran over my bike last week…..can i have a donation please? jk

16. brendan bennet Says:
    August 23rd, 2006 at 11:28 am

    r u gonna make any flatland bikes?

17. collin dall Says:
    August 23rd, 2006 at 11:36 am

    r u gonna make diiferent parts like forks and stems and handlebars and other things like that? PLEASE make them not too expensive i will buy ALOT of things if u make em cheap.

18. elliot Says:
    August 23rd, 2006 at 9:57 pm

    considering ryans from brisbane, can there be some mirra co bikes sent to like crosley cycles and big joints like that in brisbane, that would be awesome.

19. Shane Sheeys Says:
    August 24th, 2006 at 2:18 pm

    Hey where can i get a mirraco bike in kentucky?

20. carl eintz Says:
    August 24th, 2006 at 4:27 pm

    for all of u complaining about the prices, stfu. these bikes are the most logical completes i have ever seen. if u don’t wanna pay what they’re asking than just go to target and get urself a piece of crap for 200 at most. prrrrr

21. Tyler Wallen Says:
    August 24th, 2006 at 8:47 pm

    How much are the acctual bikes and when are they coming out?

22. Edson Villares Says:
    August 25th, 2006 at 5:11 am

    How could a Brazilian acquire a MirraCo Bike ?

23. Derek Says:
    August 27th, 2006 at 12:27 am

    hey i think these bikes are priced high. but i will probably still buy one. these are some nice bikes.

24. Turtle Says:
    August 27th, 2006 at 12:06 pm

    Hey, so how much do these BMX-cycles weigh?

25. noremac luaccm Says:
    August 27th, 2006 at 2:45 pm

    What is better about the Limited versions of the Blend and Black Pearl series?

26. Blake Says:
    August 28th, 2006 at 2:42 pm

    hey im wit Eick Ebie on this, when will these hot rides be on sale and r they available at Eddy’s bike shop in stow Ohio??

27. matt Says:
    August 29th, 2006 at 6:17 pm

    i really like the concept of the ltd and the price is fair, but the one down from that should have some better quality. look at the integral high end completes, the have alot of good primo parts and the price is only $20 more. so great job on the ltds buy you guys kind of forgot about the rest of the bikes.

28. wile Says:
    August 30th, 2006 at 7:38 am

    when are the dealers locations going to come out?

29. shaun Says:
    September 8th, 2006 at 11:53 pm

    could you send me this and have pictures for each bike im thinking of getting a mirra co bike if you can.
    thanks Shaun

30. ian Says:
    September 28th, 2006 at 1:56 pm

    As a few people have posted “where can i get a mirraco bike”

    Missing Link Bicycle co-op Berkeley CA (510) 843-7471

    will be stocking a range of Mirraco bikes ( ask 4 ian )

31. Luke Says:
    October 7th, 2006 at 6:57 pm

    i think your bikes r the best out there, i was thinking about getting a hoffman cause haro made the mirra for like 500$ and i didnt have that, now you started your own company,im getting one for sure! these bikes r awesome, great job. by the way, i dont think the prices r 2 high, its hard to find a bike with a 3 peace crank for 220$

    thanks, Luke

32. Papi Says:
    October 8th, 2006 at 9:17 am

    the bikes u made r sick! nice job, all u people who siad they r priced, Shut The Hell UP! im gettin one soon cause they r so nasty, im probably gettin the signatyre cause all and all, its everything i want except for the crank{i want a small one] but it works for now. nice job

33. casey Says:
    October 26th, 2006 at 5:24 pm

    when r these bikes gonna be in stores cause my parents said i could get a blend 2

34. luke Says:
    October 28th, 2006 at 3:17 am

    is the black pearl ltd $1099.99 is that in australian dollars

35. luke Says:
    October 28th, 2006 at 3:31 am

    also will u be making any black pearl ltd after they are all sold?

36. wil Says:
    November 3rd, 2006 at 6:41 pm

    these bikees r syckk! but so is ur mumsy. she told me she mite git me one.

37. Dad Says:
    November 3rd, 2006 at 6:45 pm

    Just wondering if your line of bikes will be available before Christmas. Thanx

38. jack Says:
    November 5th, 2006 at 1:18 am

    nice blend ltd you got there
    when will they be out in shops?
    and how much is it in aus money?
    thanks

    ryan guettler rocks!!!

39. Ryan crano Says:
    December 4th, 2006 at 6:06 pm

    how much is the blend ltd in aus dollars

40. Philip Says:
    December 13th, 2006 at 7:15 pm

    Will Danscomp be selling your bikes, and if so when?

41. cameron Says:
    January 1st, 2007 at 2:28 am

    when do the black pearl frames come on sale and are they going to be available in Queensland Australia

42. Steve Alledahn Says:
    April 17th, 2007 at 2:52 pm

    Hallo,

    I\’m a german Dealer , I want to know is ther a Distribution for Germany where I can get Bikes for my Shop, or is there a other way to get the Stuff?? Bikes only, or softgoods and parts later???

    sorry for bad english,:)

    steve/twentyfourseven-stuff-store

    TREK handles the Mirraco distribution worldwide. Contact your Trek rep or contact Bike Europe (Tel:Â +31 33-4509060).

    MirracoÂ

43. Luke Says:
    May 19th, 2007 at 10:05 pm

    r mirraco bikes sold in australia

44. Bill Says:
    June 14th, 2007 at 10:50 am

    do you ship, how much 2 ship, what # can i contact you at

45. CHRIS GIAN Says:
    July 8th, 2007 at 5:09 pm

    MAN, NICE BIKES BUT YOU MAKE THEM IMPOSSIBLE TO BUY..NO SHIP, AND NO DEALERS ANYWHERE.. CHRISTMAS IS COMING SOON DAVE GET YOUR BIKES OUT THERE!!!

46. Sergio Says:
    July 10th, 2007 at 11:32 pm

    Nice job guys good bikes
    I’m from México city and I have a bike’s store I´d like to know how can becomo a dealer here in México.
    Thanks

47. Dave Says:
    July 21st, 2007 at 9:59 pm

    Dont you sell any bleen 18 in. or any other bike that is an 18 in.

48. Dave Says:
    July 21st, 2007 at 10:02 pm

    I MEAN BLEND 18 in.

49. Dylan Says:
    July 22nd, 2007 at 1:31 am

    Is There Any Dealers In Sydney, Aus?????

50. Mitch G. Says:
    July 23rd, 2007 at 7:23 pm

    Hey, nice job on the line of bikes… i was wonderin wat is better, the blend ltd or the black pearl ldt???? i kno i am gettin a Blend 1 in 2 weeks and its is so frikin cool, i luv the brown color! And the bike is so frikin light 2…. props to MirraCo. p.s., u guys shud get sum parts sellin and sell ur bikes and stuff on Danscomp.

51. Rhyse Says:
    October 15th, 2007 at 10:21 pm

    Heyy guys just wondering if you’se know whether
    i can buy a bike straight from here such as
    the blend 16 because in shops the prices
    are $450, And i am located in Australia
    cheers
    Rhyse

Leave a Reply

Name (required)

Mail (will not be published) (required)

Website